Trijicon Bright & Tough Night Sights for Colt AR-15/ M16
$40.33
These Trijicon CP25 Night Sight Sets are designed for the Colt M16/AR15. Comes with the CP25F-TOOL installation tool. Green lamps are warranted for 12 years from the date of manufacturer. Trijicon offers a choice of illuminated dot colors, to suit individual shooter preferences. Trijicon Night Sights are available with green, yellow, and orange aiming dots. The front sight is only available with a standard illuminated green dot. Trijicon recommends green dots because they are the brightest lamps. They are best for targets in low- and no-light shooting conditions. However, because some shooters prefer greater distinction between their front and rear sights, Trijicon also offers yellow and orange dots for rear sights. Trijicon recommends yellow over orange for the rear dots because yellow is brighter, lasts longer, and therefore carries a longer warranty. Trijicon 3 Dot night sight sets are designed and assembled with the optimum combination of strength and safety. The patented aluminum cylinder and sapphire lens construction cannot be equaled. The brightness obtained from the tritium content is focused through the sapphire lens to give the maximum possible illumination. Because the sight blades are machined from steel rather than cast, their strength is unsurpassed. Trijicon night sights are the brightest, strongest and safest. This page represents Trijicon CP25 which fits the Colt AR15/M16. Other sets that are listed below you can find at: www.opticsplanet.com/trijicon-night-sight-sets-for-colt.html Trijicon CA01 fits Colt Govt., 1911, Combat Elite, Delta Elite models made after 1988 (.125 Tang). Also fits Para Ordnance P10 and P14 with stake-in front (excluding the Limited versions). Trijicon CA02 fits Colt Govt., 1911, Combat Elite and Delta Elite models made in 1988 or before (.055 Narrow Tang). Trijicon CA10 fits fits the Colt Combat Commander and stake-in front Para Ordnance P13 (excluding Limited version). Trijicon CA16 fits the Colt Gold Cup (National Match .45). Specifications for Trijicon Bright & Tough Night Sights for Colt AR-15/ M16: Manufacturer: Trijicon Color: Black Gun Model: M16, AR-15 Gun Make: AR Platform Fabric/Material: Metal Front Material: Tritium Rear Blade Height: 0.327 in Front Blade Height: 0.3 in Gun Type: Rifle Reticle: 3 Dot iron sights Attachment Type: Professional installation recommended. Finish: Matte Features of Trijicon Bright & Tough Night Sights for Colt AR-15/ M16: Illuminated Dots Available in Green, Yellow, and Orange High-Quality Tritium Illumination 3 Dot Iron Sights Improves Target Acquisition in Low-Light Environments Matte Black Finish Package Contents: Trijicon Bright & Tough Night Sights for Colt AR-15/ M16
Carl –
Great three dot sight system. Perfect fit replacement for the original mil-spec sights. Really standout at dusk.Only four stars because not made in USA. American flag logo is misleading as the small print says "Assembled in USA". The rear sight came stamped "Made in India". I considereded three stars for misleading american flag loga but decided these are still a great product.
Nathan –
Mine are 9 years old now and no longer produce light. They were started out bright and performed very well for probably the first 5 years. They currently do not produce any light. I would buy again knowing they'll last about 5 years.
Levi –
Highly recommend as a replacement for a rear sight peephole if you're looking to be able to increase your night time target acquisition. Easy install and great quality. The tritium is very bright so you're able to see it.
Luis –
I Installed on to my armalite m15a2 rear sight to match my trijicon front sight post. I am pleased with the results. Helps me align my sights at dust and night. Rear sights are dimmer for a reason that they are closer to the eye, so it seems bright enough when in action.
JohnInLa –
I use the 2 dot Trijicon Night Sights in all my mil spec carry handles. It helps to know how to dismantle carry handle sights because there are small parts and bearings to control, etc. The sights will work on some import handles providing the sight screw has a rounded slotted head like mil spec handles. Overall very good sights at a good price.
Dan Hall –
This is a very well-made item that is a drop-in replacement for the OEM flip-up sight. It is an easy install that takes about 5 minutes using a pin punch and flat-headed screwdriver. After drifting the pin part way, be careful to not lose the small ball bearing and spring that make up the sight's detent system. Using a small amount of grease will help position these items upon reinstalling the components. I tested the sight in a dark room and was quite pleased with the result. I recommend this item as a low-light upgrade for the A2 AR-15/16 sight.