Trijicon Bright & Tough Night Sights for Smith&Wesson (Non-Novak LoMount) – SA04

$170.66

Category:
Description

Trijicon Night Sight Sets for Smith&Wesson SA04 is a complete 3 Dot night sight set for early fixed sight Smith & Wesson Third Generation pistols which are not equipped with Novak LoMount Carry sights. (Those guns made before the changeto Novak style rear blades which took place in late 1989.) Trijicon offers a choice of illuminated dot colors, to suit individual shooter preferences. Trijicon Night Sights are available with green, yellow, and orange aiming dots. Trijicon recommends green dots because they are the brightest lamps. They are best for targets in low- and no-light shooting conditions. However, because some shooters prefer greater distinction between their front and rear sights, Trijicon also offers yellow and orange dots for rear sights. Trijicon recommends yellow over orange for the rear dots because yellow is brighter, lasts longer, and therefore carries a longer warranty. Trijicon Smith&Wesson 9mm Fixed Rear 3 Dot Night Sight Set SA04 are designed and assembled with the optimum combination of strength and safety. The patented aluminum cylinder and sapphire lens construction cannot be equaled. The brightness obtained from the tritium content is focused through the sapphire lens to give the maximum possible illumination. Because the sight blades are machined from steel rather than cast, their strength is unsurpassed. Trijicon night sights are the brightest, strongest and safest. Available Trijicon S&W 9mm with Fixed Rear Night Sight Sets SA-04: Trijicon SA04 S&W 9mm with Fixed Rear, 3 dot green front & green fixed rear night sight set Trijicon SA04O S&W 9mm with Fixed Rear, 3 dot green front & orange fixed rear night sight set Trijicon SA04Y S&W 9mm with Fixed Rear, 3 dot green front & yellow fixed rear night sight set For more information on Trijicon Night Sight Sets please make sure to check out the Trijicon Night Sight Sets Catalog  in PDF format (~250Kb). Package Contents: Trijicon Night SA04 Sight Sets for Smith&Wesson (Non-Novak LoMount) Specifications for Trijicon Bright & Tough Night Sights for Smith&Wesson (Non-Novak LoMount) – SA04: Manufacturer: Trijicon Gun Make: Smith & Wesson Gun Model: Smith & Wesson Model 5903, Smith & Wesson Model 5904, Smith & Wesson Model 915, Smith & Wesson Model 5906, Smith & Wesson Model 411 Fabric/Material: Metal Front Material: Tritium/Paint Gun Type: Pistol Attachment Type: Professional installation recommended. Front Blade Height: 0.106 in Rear Blade Height: 0.168 in

Reviews (4)

4 reviews for Trijicon Bright & Tough Night Sights for Smith&Wesson (Non-Novak LoMount) – SA04

  1. MBW

    I really like this sight. It is very easy to pick up day or night. Point of aim versus point of impact is identical to the origin sight so there was no need to change anything. I would highly recommend this to anyone looking for the night sight for their S&W.

  2. SmithFan

    Great quality night sight. Used this to adjust the point of impact on my Smith & Wesson 1076. Its narrower than the original but worded well. The 1076 uses a wider base for the front sight but this front sight fit works well. I needed to raise the point of impact so I installed this lower front sight.

  3. Bruce

    I ordered the SA04Y set for my S&W 915 that I bought new in the early 80s. Of my 4 semi-auto pistols the 915 has always been my favorite, but lately my old eyes have had a hard time with the sights. Trijicon night sights were the only replacements I could find for the "non Novak" 915. I didn't think I needed night sights, but I knew I needed better sights, and hoped that these would be an improvement. I have to say I love them! Huge improvement – great in any or no light, and they dramatically improved my accuracy. The only problem is that now I want them for every gun I own…Installation was fairly easy, but took a little time. Be careful removing the rear sight; there are springs for the mag disconnect and firing-pin safety under it. Remove the sight from left to right. The rear sight height had to reduced a bit to fit the dovetail (I believe this is normal). Using a sharpening stone, I slowly removed material from the bottom of the sight until it fit into the right side of the dovetail about 25% of the way, and then drove it home from right to left. The front sight needed no modification.

  4. Oldsarge

    I originally purchased a Meprolite Novak style sight set for this pistol that did not fit. Rated 4 stars only because my gunsmith had to file a little bit on the rear sight wedge to get it to fit properly. Clearances were 5 thousanth difference. I expected these to fit as indicated without necessary filing/re-sizing. Otherwise once installation was complete in about 20 minutes sights fits perfectly, looks great, appears to produce proper sight / bore alignment. I have not yet fired firearm since sight installation, but I fully expect no problems. Very happy with end results. Thanks to OpticsPlanet for best pricing and easy exchanges.

Add a review

Your email address will not be published. Required fields are marked *